Product Description
Denna produkt skickas direkt från leverantör. På grund av Covid-19 så kan leveranstiden vara något längre och upp till 8 dagar.
Du kan koppla till en 4:de axel på din maskin. Raw maskiner har en port ledig. Vi har ingen support för denna produkt utan man för söka sig till en lösning själv. Med en roterande axel så kan man fräsa runda objekt så som stolsben mm. Tänk på att du även behöver en extra Drivmodul och eventuellt mer ström för den extra motorn
Beskrivning på engelska
Engraving machine 4th axis (A axis, Rotational Axis, CNC dividing head) gapless harmonic reducer gearbox
Chuck type: K11-80 (3 jaw centering chuck)
Center height: 65mm
Total height: 115mm
Angle: 0.3°/ step
Gear box output shaft diameter: 20mm
Reducing ratio: 6:1
Stepper motor: Nema23 57mm 3A 2-phase 4 wire
Accessories: Set of Anti-claw and wrenches
The fourth axis parameter settings:
Mach3 system settings: the pulses required for 1°
(Motor 1 lap pulses x Driver fine fraction x Reduction ratio) ÷ 360°
For example: 57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
(200 x 16 x 100) / 360=888.88888888)
Weihong system settings: 1 pulse along the angle
360°/(Motor 1 lap pulses x Driver fine fraction x Reduction ratio)
For example: 57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
360 / (200 x 16 x 100) =0.001125
Tailstock type:
Center Height: 65mm
Stretch distance:50mm
Top tip: activity type
Axial locking wrench for tailstock
Stepper Motor:
Nema 23 stepper motor L76mm
Shaft Diameter: 8 mm
Shaft length: 25.5mm
Step Angle:1.8
Current: 3A
Voltage: 4.2V
Temperature Rise: 80 c max
Ambient Temperature: -20 c–+50 c
Phase No. : 2HP
Insulation Resistance: 100MOhm(500V DC)
Holding Torque: 18kg.cm